| |
FEATURES
& SPECIFICATIONS
- This shelter is essentially the
same as the Type A, but it is wired to operate on both
60 and 400 Hz power.
This shelter is similar to the
Basic Mobile Facility Type B except that it
has provisions for two ECUs on one side and the other
side is removable to permit complexing with either a
Side Opening Mobile Facility Type B or a Side Opening
Mobile Facility Type C.
This shelter is similar to the
Side Opening Mobile Facility Type A except that it has
no end doors. It has a small personnel door located
between the ECU opening on the non-removable side. This
shelter is generally used in complexes with other side
removable shelters.
This shelter contains no power
distribution or lighting, but it has two removable sides
and a single end personnel door. It is generally used
in complexes with other side removable shelters to provides
increased workspace.
This shelter is used as a junction
for up to 6 other MF units. It contains power distribution
capabilities that allow it to transfer 200 Amp 60 Hz
and 100 Amp 400 Hz power to the attached Mobile Facilities.
MIL-M-81957(AS)
ISO 1496/1 and ANSI MH5.1, 5.1.1 and 5.4
96 in. high, 96 in. wide, 238 -1/2 in. long
84-5/16 in. high, 89-13/16 in. wide, 232-5/16 in. long
4,200 lbs.
15,800 lbs.
15
years service, 20 years storage
Insulated to provide a heat transfer coefficient of
0.25 BTU/hr. ft.2/°F
Operation: –40°F to +125°F plus solar
load to minimum of +180°F. Storage –65°F
to +160°F
Live
load of 660 lbs. on an area 24 in. by 12 in.; or 75
lb./ft.2 uniform snow load
2,000 lb. pullout and 40 inch-lb. torque
|
